Owning a Kirby vacuum cleaner is an investment in your home’s cleanliness; however, like any other appliance, it requires regular maintenance. One of the most important maintenance tasks is changing out the vacuum belt. This blog post will provide a step-by-step guide on how to replace your Kirby vacuum cleaner belt. Learn How to Put a Belt on a Kirby Vacuum Cleaner?
How to Put a Belt on a Kirby Vacuum Cleaner?
Step 1: Unplug the vacuum – Before you start replacing your belt, make sure to unplug your Kirby vacuum from its power source. Doing this isn’t just for safety reasons; it’s also necessary because you’ll need to remove some of the parts that are connected to electrical wiring in order to get at the belt.
Step 2: Remove the bottom plate – The next step is to remove the bottom plate of your vacuum cleaner. To do this, simply use a screwdriver or similar tool to loosen and remove the screws located around its edge. Once you’ve removed all of these screws, you can then lift up and remove the bottom plate. This will allow access to all of the internal components that make up your vacuum’s motor and drive system.
Step 3: Locate and loosen the belt tensioner – The main component that holds the belt in place is known as a “belt tensioner.” It looks like a large metal spring with two feet at each end that are used to secure either side of the belt in place. To loosen this part, you’ll need to use two screwdrivers—one on each foot—and hold them firmly as you rotate them counterclockwise until they come loose from their respective mounts. After that, you should be able to pull off both sides of the old belt without too much trouble.
Step 4: Install new belt – Once you have removed both sides of the old belt, go ahead and install your new one by looping it around both ends of the drive shaft until it has been secured into place by both ends of your belt tensioner (which should be tightened securely). You can then reattach all other components as needed before plugging in your vacuum and testing it out!
Conclusion
Replacing belts on Kirby vacuums may seem like a difficult task but with some patience and attention to detail, anyone can do it! Just remember always work safely when handling any type of machinery and never attempt any repairs if unsure about what you’re doing – seek professional help if needed! With these tips in mind, changing out belts on Kirby vacuums should be no problem at all!