A treadmill is one of the most popular pieces of exercise equipment because it is a great way to get a cardio workout without having to leave your home. But, like any piece of fitness equipment, it needs regular maintenance and care. One important step in keeping your treadmill running smoothly is to lubricate the belt and deck. Here’s how you can do that in just 6 simple steps. Learn How to Lube Treadmill?
How to Lube Treadmill?
Step 1: Unplug the Treadmill from the Wall and Remove any Accessories
The first step is always safety, so make sure you unplug the treadmill from its power source before you begin work on it. You should also remove any accessories, such as straps or bungees that are attached to the machine. This will give you easy access when you are ready to start lubricating.
Step 2: Clean the Belt and Deck
Before applying any lubrication, make sure that both the belt and deck are free from dirt and debris. Wipe down both surfaces with a soft cloth or towel before moving on to step 3.
Step 3: Apply Silicone-Based Lubricant
Once your treadmill has been cleaned, it’s time to apply lube! Use a silicone-based lube as opposed to an oil-based one; this will help reduce friction while still providing enough lubrication for smooth operation. To apply the lube, squeeze a few drops onto each side of the belt and spread evenly with a soft cloth or paper towels. Make sure not to overdo it; too much lube can create an unsafe operating environment on your treadmill.
Step 4 Cover Entire Length of Belt with Lubricant
Step 4 should be fairly straightforward – cover the entire length of belt with lubricant! It’s important that you don’t miss any spots; otherwise, your machine won’t operate at optimal efficiency. Make sure you pay close attention to any areas where there may be excess friction due to wear and tear over time (for example, near joints or corners). Once again, be careful not to use too much lubricant – a little goes a long way.
Step 5 Reattach Any Accessories (Optional)
If desired, reattach any accessories that were previously removed in step 1; this includes straps or bungees used for additional support while exercising. Make sure they are securely fastened so they do not come loose during use.
Step 6 Test Out Your Newly Lubricated Treadmill
Last but not least – test out your newly lubricated treadmill! Plug it back into its power source and turn it on; if all goes well, then congratulations! You have successfully completed the task of properly lubing up your machine! If there are still issues with noise or vibration while in use despite following these steps precisely, then further maintenance may be required by a professional technician who specializes in treadmills.
Conclusion
Properly lubricating your treadmill is an essential part of keeping it functioning optimally for years down the road – plus, it’s easy once you know what steps need to be taken! In just 6 simple steps outlined above – unplugging from wall outlet, removing accessories (optional), cleaning belt & deck area , applying silicone based lubricant , covering entire length of belt & reattaching accessories (optional) – you can have your treadmill running smoother than ever before!. So next time maintenance time comes around don’t forget these tips – they’ll surely come in handy! Happy sweating!.